{
  "examSlug": "cpt",
  "examCode": "CPT",
  "examName": "Certified Phlebotomy Technician",
  "outline": {
    "title": "NHA Certified Phlebotomy Technician (CPT) Test Plan",
    "effective": "Exams on or after 2026-01-07 (2024 job analysis)",
    "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
  },
  "domains": [
    { "id": "safety", "name": "Safety and Compliance", "weight": 26 },
    { "id": "collect", "name": "Patient Collection", "weight": 60 },
    { "id": "process", "name": "Processing", "weight": 14 }
  ],
  "topics": [
    {
      "slug": "exam-format-scoring",
      "domainId": "safety",
      "outlineRef": "Exam characteristics",
      "question": "How many questions are on the NHA CPT exam, and what score passes?",
      "answer": "The NHA CPT test plan for exams on or after January 7, 2026 (based on the 2024 job analysis) is 100 scored items plus 20 unscored pretest items, with 2 hours of exam time. You cannot tell which items are pretest while you test, and only the scored items count. NHA’s candidate handbook scores these exams on a scale from 200 to 500. A scaled score of 390 or higher passes. That figure is not a raw percent correct, because the scale accounts for form difficulty. Timed practice on this site is one sitting of the 100 scored items in 120 minutes.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — 100 scored items, 20 pretest items, 2 hours",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "domain-weights",
      "domainId": "safety",
      "outlineRef": "Summary examination outline",
      "question": "What are the CPT domain weights on the test plan for exams on or after January 7, 2026?",
      "answer": "Of the 100 scored items, the plan for exams on or after January 7, 2026 assigns Safety and Compliance 26, Patient Preparation 20, Routine Blood Collections 28, Special Collections 12, and Processing 14. Core Knowledge (anatomy, blood components, pre-analytical error, and similar statements) is not a sixth scored domain; it can appear inside the five domains. Practice on this site keeps Safety and Compliance at 26 and Processing at 14, and groups Patient Preparation, Routine Blood Collections, and Special Collections as Patient Collection (20 + 28 + 12 = 60).",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — domain item counts",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "eligibility-requirements",
      "domainId": "safety",
      "outlineRef": "Candidate eligibility",
      "question": "What does NHA require before you sit for CPT?",
      "answer": "NHA’s candidate handbook requires a high school diploma or recognized equivalent (candidates who will earn it within the provisional window follow the handbook’s provisional route). You also complete a qualifying training program in phlebotomy, or you document supervised phlebotomy work experience: at least one year in the last three years, or two years in the last five years. Training completed five or more years before application also needs that work-experience path. For CPT specifically, you must be able to show at least 30 successful venipunctures and 10 capillary or finger sticks on live people. Confirm the current handbook before you apply, because pathway details can change.",
      "citation": {
        "label": "NHA Candidate Handbook — CPT eligibility and live-stick requirements",
        "url": "https://www.nhanow.com/docs/default-source/test-plans/candidate_handbook.pdf"
      }
    },
    {
      "slug": "hand-hygiene",
      "domainId": "safety",
      "outlineRef": "1 — Safety and Compliance",
      "question": "When should a phlebotomist use soap and water instead of an alcohol-based hand rub?",
      "answer": "CDC’s clinical hand-hygiene guidance prefers an alcohol-based hand sanitizer when hands are not visibly soiled, because it kills more germs in routine care and is easier to use between tasks. Wash with soap and water when hands are visibly soiled, before eating, and after using the restroom. During outbreaks of Clostridioides difficile or norovirus, CDC also calls for soap and water after caring for patients with known or suspected infection, because alcohol does not reliably remove spores. Rub all hand surfaces for the product’s contact time; when washing, cover all surfaces for at least 15 seconds, rinse, and dry with a disposable towel.",
      "citation": {
        "label": "CDC, Clinical Safety: Hand Hygiene for Healthcare Workers",
        "url": "https://www.cdc.gov/clean-hands/hcp/clinical-safety/index.html"
      }
    },
    {
      "slug": "ppe-sequence-precautions",
      "domainId": "safety",
      "outlineRef": "1 — Safety and Compliance",
      "question": "In what order is PPE put on and taken off, and what changes for airborne isolation?",
      "answer": "CDC’s sequence for putting on full PPE is gown first, then mask or respirator, then goggles or face shield, then gloves last so the cuffs cover the gown wrists. Removal that limits self-contamination is gloves first, then goggles or face shield, then gown, then mask or respirator, followed by hand hygiene. The exact order is tailored to the precautions on the door. Airborne infection isolation (tuberculosis, measles, varicella) requires a fit-tested N95 or higher respirator; a surgical mask does not replace it. Droplet precautions use a surgical mask. Contact precautions add gown and gloves on room entry, discarded before you leave, and not worn to the next patient.",
      "citation": {
        "label": "CDC, Sequence for putting on and removing PPE",
        "url": "https://www.cdc.gov/healthcare-associated-infections/media/pdfs/ppe-sequence-p.pdf"
      }
    },
    {
      "slug": "needlestick-bbp",
      "domainId": "safety",
      "outlineRef": "1 — Safety and Compliance",
      "question": "What does OSHA require after a needlestick, and how are used needles discarded?",
      "answer": "Under the Bloodborne Pathogens Standard, wash a needlestick or cut with soap and water right away, flush splashes to the nose or mouth and irrigate the eyes, then report the exposure immediately and follow the employer’s exposure-control plan. Do not squeeze the wound or apply bleach. Contaminated needles are not recapped by hand, bent, or broken. Activate the safety feature with one hand and discard the needle and tube holder together, as one unit, in a closable, puncture-resistant, leakproof, labeled sharps container. Holders are single-use. Soft bloody waste such as gauze and gloves goes in a biohazard bag, not in the sharps container.",
      "citation": {
        "label": "OSHA Bloodborne Pathogens Standard, 29 CFR 1910.1030",
        "url": "https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.1030"
      }
    },
    {
      "slug": "patient-identification",
      "domainId": "collect",
      "outlineRef": "2 — Patient Preparation",
      "question": "How do you confirm identity before a blood draw?",
      "answer": "Use at least two person-specific identifiers, such as full name plus date of birth or a medical record number, and have the patient state and spell the name rather than answering yes or no to a name you supply. A room number or physical location is not an identifier. Match the requisition to the inpatient wristband and resolve any mismatch before the draw. The Joint Commission’s identification goal also requires that containers used for blood and other specimens be labeled in the presence of the patient. Newborns need a distinct method, such as a naming system that includes the mother’s name, not a room number.",
      "citation": {
        "label": "The Joint Commission, National Patient Safety Goals — patient identification (ambulatory, 2026)",
        "url": "https://digitalassets.jointcommission.org/api/public/content/92c95c4e94304b2084e7e039d916719b?v=3c64fe83"
      }
    },
    {
      "slug": "order-of-draw",
      "domainId": "collect",
      "outlineRef": "3 — Routine Blood Collections",
      "question": "What is the venous order of draw?",
      "answer": "CLSI’s published order, used to keep additives from contaminating the next tube, is: blood-culture tube or bottle, then sodium citrate, then serum tubes (including clot activator and gel), then heparin with or without gel, then EDTA with or without gel, then sodium fluoride with potassium oxalate. The same order applies when blood is transferred from a syringe. Plastic serum tubes that contain clot activator can interfere with coagulation tests, so only blood-culture tubes, glass nonadditive serum tubes, or plastic serum tubes without clot activator may be collected before the citrate tube. Tubes not on this list are placed by the risk that their additive would change the next result if carryover occurred.",
      "citation": {
        "label": "CLSI, Order of Blood Draw Tubes and Additives",
        "url": "https://clsi.org/resources/insights-blog/order-of-blood-draw-tubes-and-additives/"
      }
    },
    {
      "slug": "additives-inversions-citrate",
      "domainId": "collect",
      "outlineRef": "3 — Routine Blood Collections",
      "question": "Why must a citrate tube be full, and how are additive tubes mixed?",
      "answer": "A sodium citrate tube is calibrated for a 9:1 ratio of blood to anticoagulant. An underfilled citrate tube is not a valid coagulation specimen, because the extra anticoagulant changes the result. When a winged set is used and citrate is the first tube, draw a discard tube first so air in the tubing does not underfill the citrate tube; the discard tube itself does not have to fill. After filling, invert additive tubes gently the number of times the manufacturer states. Do not shake. Inversion counts differ by additive and by manufacturer, so the package insert controls the count rather than a single number memorized for every tube.",
      "citation": {
        "label": "CLSI, Order of Blood Draw Tubes and Additives — citrate before clot-activator serum tubes",
        "url": "https://clsi.org/resources/insights-blog/order-of-blood-draw-tubes-and-additives/"
      }
    },
    {
      "slug": "tourniquet-time",
      "domainId": "collect",
      "outlineRef": "3 — Routine Blood Collections",
      "question": "How long may a tourniquet stay on, and should the patient pump a fist?",
      "answer": "Place the tourniquet about 3 to 4 inches above the site and leave it on no more than one minute before the vein is accessed. Release it as soon as blood flow is established, before the needle comes out. A longer time hemoconcentrates the specimen and can raise potassium, proteins, and other analytes. Do not have the patient pump a fist; repeated pumping also falsely raises potassium. A still hand, gravity, and a brief tourniquet are enough to distend the vein. If you must reapply the tourniquet, wait for the arm to recover rather than leaving it on through a long search.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — routine collection tasks, with CLSI PRE02 practice",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "capillary-versus-venous",
      "domainId": "collect",
      "outlineRef": "3 — Routine Blood Collections",
      "question": "When is a capillary collection used, and why is its order of draw different?",
      "answer": "Capillary (dermal) puncture is used when a small volume is enough, veins are not usable, or the patient is an infant or other person for whom venipuncture is not appropriate. It is not a substitute for tests that need a full venous tube, such as most coagulation tests and blood cultures. The capillary order is not the venous order: blood gas is collected first, then EDTA, then other additive tubes, then serum. EDTA is early so platelets are less likely to clump. For an infant heel stick, puncture only the medial or lateral plantar surface, never the posterior curvature, the arch, or a previous puncture site, and keep the depth at or under 2.0 mm so the calcaneus is not injured.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — dermal puncture; CLSI GP42 capillary order and heel-stick limits",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "blood-cultures",
      "domainId": "collect",
      "outlineRef": "4 — Special Collections",
      "question": "How should adult blood cultures be collected?",
      "answer": "CDC’s collection model starts with at least two patient identifiers, then a skin disinfectant that contains alcohol so the agent can reach the skin, and disinfection of the bottle septum with 70 percent isopropyl alcohol. Collect before antimicrobial therapy when possible. A set is usually one aerobic and one anaerobic bottle, about 10 mL in each, and a second set should come from a separate venipuncture. Volume matters more than a fixed time gap. Blood-culture bottles are first in the venous order of draw. Do not touch the site again after it is dry. Facility procedure controls the exact antiseptic; alcohol alone is not the complete skin preparation the culture standard expects.",
      "citation": {
        "label": "CDC, Collect adult blood culture sets",
        "url": "https://www.cdc.gov/lab-quality/php/preventing-adult-blood-culture-contamination/collect.html"
      }
    },
    {
      "slug": "blood-alcohol-antiseptic",
      "domainId": "collect",
      "outlineRef": "4 — Special Collections",
      "question": "What skin preparation is used for a blood alcohol specimen?",
      "answer": "Do not clean the site with an alcohol-based antiseptic when the specimen is for blood alcohol, because the antiseptic can contaminate the result. Use a non-alcohol agent allowed by the facility procedure, such as povidone-iodine, benzalkonium chloride, or soap and water, and let it dry. Fill the gray-top tube (sodium fluoride with potassium oxalate) and keep it stoppered. If the draw is also a legal or forensic specimen, the chain-of-custody steps for that request apply on top of the collection steps: the seal, the signatures, and the patient identification all have to stay intact.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — special collections, including blood alcohol",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "donation-screening",
      "domainId": "collect",
      "outlineRef": "4 — Special Collections",
      "question": "What donor checks apply before a whole-blood donation?",
      "answer": "FDA requires the collection site to determine eligibility on the day of donation, before the unit is drawn: donor history for transfusion-transmitted infection risks, a check that the interval since the last donation is appropriate, and a physical assessment. For allogeneic donors, hemoglobin must be at least 13.0 g/dL for males (hematocrit at least 39 percent) and at least 12.5 g/dL for females (hematocrit at least 38 percent), with a narrow female alternative only under an FDA-accepted procedure. Temperature must not exceed 37.5 °C (99.5 °F), weight must be at least 110 pounds, and the phlebotomy site must be free of infection or lesions. A single unit of whole blood may be collected no more than once in 8 weeks, unless a documented physician exception applies. Earlobe blood is not an acceptable sample for the hemoglobin check.",
      "citation": {
        "label": "21 CFR 630.10 and 21 CFR 630.15 — donor eligibility and whole-blood frequency",
        "url": "https://www.ecfr.gov/current/title-21/chapter-I/subchapter-F/part-630/subpart-B"
      }
    },
    {
      "slug": "bedside-labeling",
      "domainId": "process",
      "outlineRef": "5 — Processing",
      "question": "When and where are blood tubes labeled?",
      "answer": "Label tubes at the bedside, in the patient’s presence, immediately after the draw and before you leave. Do not pre-label empty tubes, and do not carry unlabeled tubes back to a counter to finish the job. The label needs the patient’s first and last name, a unique identifier, the collection date and time, and the collector’s identity. The Joint Commission identification goal requires labeling of blood and other specimen containers in the presence of the patient, after the two-identifier check. A mismatch between the label, the wristband, and the requisition stops the process until it is resolved; it is not corrected by relabeling a tube whose identity is already in doubt.",
      "citation": {
        "label": "The Joint Commission, National Patient Safety Goals — label specimens in the patient’s presence",
        "url": "https://digitalassets.jointcommission.org/api/public/content/92c95c4e94304b2084e7e039d916719b?v=3c64fe83"
      }
    },
    {
      "slug": "specimen-integrity",
      "domainId": "process",
      "outlineRef": "5 — Processing",
      "question": "What ruins a specimen after it is drawn?",
      "answer": "Hemolysis from a traumatic draw, a needle that is too small for the vacuum, shaking the tube, or forcing blood through a needle from a syringe makes many chemistry results unusable, especially potassium. Pouring from one tube into another carries the first additive into the second and is not a way to fix a short draw. An underfilled citrate tube and a clotted EDTA tube are rejected rather than run. Protect bilirubin from light. Transport ammonia and lactic acid on an ice slurry. Cold agglutinins and cryoglobulins are kept warm instead. Separate serum or plasma from cells promptly, commonly within about two hours, so cells do not keep changing the analytes. QNS, hemolysis, clotting, and wrong temperature are recollection problems, not problems the analyzer can correct.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — Processing, specimen integrity and handling",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "chain-of-custody",
      "domainId": "process",
      "outlineRef": "5C — Chain of custody",
      "question": "What keeps a forensic or blood-alcohol chain of custody intact?",
      "answer": "The CPT test plan expects the collector to follow chain-of-custody rules when the order requires them, including forensic studies and blood alcohol. Every hand-off is written down and signed, the specimen is not left unattended, and the tamper-evident seal stays unbroken from the patient to the laboratory. Identification is done before the seal goes on, and the labeled specimen matches the custody form. If the seal or the signature trail is broken, the specimen is not quietly tested; the recollection or rejection procedure for that request is followed. Workplace drug testing uses the federal custody-and-control process; a legal blood alcohol follows the requesting agency’s custody procedure. Either way, an undocumented gap ends the chain.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — 5C, chain of custody for forensic studies or blood alcohol",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    },
    {
      "slug": "serum-clot-centrifuge",
      "domainId": "process",
      "outlineRef": "5A — Processing",
      "question": "What has to happen before a serum tube is centrifuged?",
      "answer": "Let the blood clot completely before centrifugation. Separator tubes often need about 30 minutes and plain red tubes about 60 minutes; follow the tube manufacturer when the times differ. Spinning too soon leaves a fibrin clot in the serum. Balance the centrifuge, keep the lid closed until the rotor stops, and do not re-spin a gel separator tube, because a second spin can contaminate the serum with cells. Plasma tubes (anticoagulated) do not need that clot time and are spun according to the test and the tube insert. Aliquots are labeled with the same patient identifiers as the primary tube before they leave the processing area.",
      "citation": {
        "label": "NHA CPT Test Plan (2025) — 5A, centrifugation, aliquoting, and handling requirements",
        "url": "https://info.nhanow.com/hubfs/Test%20Plans/nha-2025-cpt-test-plan.pdf"
      }
    }
  ]
}
